nowfound

Dev tools · June 4, 2026

Bit-banged 10BASE-T Ethernet and Wi-Fi router in Rust on the Pico 2 W

Software 10BASE-T Ethernet (using PIO to bit-bang TX and RX) and wireless router on the Raspberry Pi Pico 2 W. Running cyw43 + an async executor in rust on the RP2350's RISC-V cores. Using cheap and minimal external hardware (just a magjack and ISL3177E RS-485 transceiver). I wanted to see how far I could get with the cheap, MCU-based, Wi-Fi router idea and learn some more about using rust on the RP2350 and RISC-V. Definitely not a good choice for a home router but it could be useful for low-rate IoT traffic.

Bit-banged 10BASE-T Ethernet and Wi-Fi router in Rust on the Pico 2 W launched on June 4, 2026 with 5 votes, #2,466 of 22,647 launches that month and more than 75% of that year's launches.

Visit github.com ↗Alternativestop 11% of June 2026

What it does

Bit-banged 10BASE-T Ethernet + Wi-Fi router in Rust on the Raspberry Pi Pico 2 W - mattdeeds/pico-10base-t-rs

Software 10BASE-T Ethernet (PIO bit-bang TX and RX) and wireless router on the Raspberry Pi Pico 2 W . Uses the dual Hazard3 RISC-V cores with pure Rust ( no_std ). A ~$5 micro talks 10 Mbit Ethernet to a real network with PIO, DMA, a RS-485 transceiver, and magnetics. Rust port of C project , which extended kingyoPiyo/Pico-10BASE-T (the original C/PIO Manchester TX-only design) with a RX path — Manchester decode over an RS-485 transceiver. This Rust rewrite runs on rp235x-hal , exposes the NIC as a smoltcp phy::Device , then grows into a NAPT router with a cyw43 Wi-Fi AP. Full detail + method in docs/performance.md . Headlines (measured on real hardware): It's a fun software-PHY NIC and a…from github.com

Does a similar job

all alternatives →
  • 30ms latency screen sharing in Rust2024 · github.com · ▲353

    CLI Native WebRTC Agent in Rust. Contribute to bitwhip/bitwhip development by creating an account on GitHub.

  • IP Guide – Info on IP addresses, Networks, and ASNs2023 · ip.guide · ▲363

    Hey all, wanted to share my recent weekend hack project. I wanted to improve upon the existing space for looking up information about IP addresses and ASNs. The backend is written in Rust and pulls BGP data every 8 hours from the RIPE RIS project to build up a routing table and also adds geolocation information. The frontend is using React and Tailwind. Would love any feedback or suggestions on what to improve.

  • I integrated my from-scratch TCP/IP stack into the xv6-riscv OS2025 · github.com · ▲147

    Hi HN, To truly understand how operating systems and network protocols work, I decided to combine two classic learning tools: the xv6 teaching OS and a from-scratch TCP/IP stack. I'm excited to share the result: my own from-scratch TCP/IP networking stack running directly inside the xv6-riscv (https://github.com/pandax381/xv6-riscv-net) kernel. The project uses a modern virtio-net driver, allowing it to run seamlessly in QEMU and communicate with the host machine. Key features: - From-Scratch Stack: The core is powered by microps…

  • Raspberry Pi Zero Wireless2017 · raspberrypi.com · ▲262

    New Raspberry Pi Zero with wireless LAN and Bluetooth

  • A DOS-like hobby OS written in Rust and x86 assembly2025 · github.com · ▲207

    To try it out, simply build the project yourself from source, or use attached bootable ISO image of the system (in Releases on Github) and run it in QEMU. https://blog.vxn.dev/rou2exos-rusted-edition

  • rallyup – Lightweight Wake-on-LAN Scheduler2024 · github.com · ▲141

    Hi HN, I’ve wanted a simple solution to handle Wake-on-LAN sequences for my home and work labs to boot up servers in the right order. I was already dabbling in Rust and thought this would be an interesting project to dive deeper and see if it could work well for this kind of network tool. The result is rallyup. rallyup lets you set up server dependencies in a YAML file, so each service (e.g., firewalls, storage, VM hosts) comes online in the right order. It verifies each server’s status before moving to the next. Features: - Dependency-based WOL with VLAN support - Built-in health checks…

More dev tools this month

the category →
  • Contribute to oosexgang/hackios-xnu-kernel development by creating an account on GitHub.

    Dev tools · 2d ago · github.com

  • /dev/null▲492

    a social network for devs

    Dev tools · 5d ago · dev-null.sh

  • open-source IDE for thoughtful software design. Contribute to devdotfast/whiteboard development by creating an account on GitHub.

    Dev tools · 30d ago · github.com

  • Contribute to reladraw/reladraw development by creating an account on GitHub.

    Dev tools · 28d ago · github.com

  • OpenBot▲362

    Grok Bot alternative: free, local, open-source, multiplayer

    Dev tools · 25d ago · openbot.run

  • Talanoa▲346

    Hi HN, I’m a fullstack developer, and honestly, I’ve lost count of how many side projects I’ve worked on over the years. But one idea kept coming back to me: a different kind of email client. It first came to me in 2014: “What if we could handle emails more like conversations?” Every year, I’d revisit this concept in my “Build Notes.” Ten years later, no one had built exactly what I had in mind — so I finally decided to do it myself. That’s how Talanoa was born. I wanted something focused on people, not timelines. I was tired of marking messages as unread just to remember to reply later, or…

    Dev tools · 22d ago · talanoa.email

Source: Show HN post ↗

Launched alongside, June 2026

the whole month →
  • Fundraisly▲1,537

    AI fundraising agent that finds investors and books meetings

    AI · Jun 2026 · fundraisly.com

  • Today, I’m proud to announce Homebrew 6.0.0. The most significant changes since 5.1.0 are a new tap trust security mechanism, the new faster, smaller, default internal Homebrew JSON API, sandboxing on Linux, better defaults informed by our user survey, many brew bundle improvements, improved performance and initial support for macOS 27 (Golden Gate). Happy to discuss any questions here!

    Dev tools · Jun 2026 · brew.sh

  • Hi HN! I was super frustrated at apps like tiktok and wechat preventing me from saving or downloading the animated gifs, so I made a little tool to turn a screen recording into a slack-sized emoji. Hope you get some value from this!

    Life & fun · Jun 2026 · vorpus.github.io

  • Upstream▲976

    The inbox designed for humans and agents

    AI · Jun 2026 · upstream.do

  • Goldfish▲958

    Press Option. It knows your work and replies like you

    AI · Jun 2026 · goldfish.sh

  • Search 18 years of Hacker News and chart how any topic, tool, or person trended. Overlay terms to compare their rise and fall across 45M posts and comments.

    Life & fun · Jun 2026 · hackernewstrends.com